How Much CBD Oil Can One Plant Produce

CBDISTILLERY

Buy CBD Oil Online

Cannabidiol, abbreviated to CBD, is a cannabinoid. Cannabinoids are compounds found in hemp and colloquially divided into major and minor… It’s no secret that the CBD industry is booming, but exactly how great is the ROI of hemp farming? How much CBD is produced per acre of hemp, or rather, how much CBD is in hemp oil after extraction? According to a 2020 survey, the average CBD yield was approximately 1,520 pounds per acre, but what does that actually me There are different factors affecting the quality and quantity of CBD oil such as quality of the plant, method of extraction, and extraction skills.

How is CBD Extracted from Hemp?

Botanically speaking, hemp is a type of Cannabis sativa (a species of the Cannabis genus) characterized by the presence of high quantities of Cannabidiol (CBD) — a phytocannabinoid that accounts for up to 40% of the plant’s extract with low-to-negligible amounts of THC (typically less than 0.3%).

Types of Cannabis sativa that exhibit higher quantities of THC are classified as simply as “cannabis”.

There are two other species of Cannabis; Indica and Ruderalis, which are both usually simply classified as Cannabis. However due to hemp’s strict classification being based upon the plant’s chemical constituents, technically species of Indica and Ruderalis can be considered Hemp as well.

Sounds confusing? Essentially, they are all species of the Cannabis genus, but the term “hemp” is used to specifically with regards to plants with less than 0.3% THC content.

This definition is due largely in part to the passing of the 2018 Farm Bill which defines hemp as the plant Cannabis sativa L. and any part of the plant with a delta-9 THC concentration of not more than 0.3% by dry weight.

So… What is CBD?

Cannabidiol, abbreviated to CBD, is a Cannabinoid. Cannabinoids are compounds found in cannabis and colloquially divided into “major” and “minor” cannabinoids.

The most notable major cannabinoids are the phyto-cannabinoid tetrahydrocannabinol (THC) (Delta9-THC or Delta8-THC), the primary psychoactive compound in cannabis. Cannabidiol (CBD) is the major cannabinoid.

But there are at least 144 different cannabinoids isolated from cannabis (at the latest count!) delivering varied effects to the human body. However, the two most prevalent and the two that the plant produces in the highest quantities are Cannabidiol (CBD) and Tetrahydrocannabinol (THC).

What part of the Hemp Plant does CBD come from?

So now that we know what CBD is, especially if we intend to extract this valuable cannabinoid, it will be helpful to understand where the CBD is produced on the plant.

Like most woody plants, hemp plants have a sometimes quite large stalk or stem that runs up the entire plant and it has branches like a tree branching out from the main stem. From these branches grow the archetypal fan-type leaves which spread out in odd numbers of 5, 7, and 9, and the colas or buds of the plant.

When we are processing the hemp plant, we can simplify its anatomy into these four categories: stalk, branches, leaves, and buds or colas.

Furthermore, when intending to extract and refine CBD from the hemp plant we are primarily only concerned with the Colas or buds, and the surrounding leaves or trim of the plants. All other plant materials are best to remove because they have little to no CBD and they make the extraction process more difficult and time consuming and less profitable.

On the Colas of the mature hemp plants are what appear to be tiny visible crystals or dew droplets. These are called Trichomes, and these are the glands in which the Cannabinoids like CBD and THC are produced by the plant.

How is CBD Extracted from Hemp?

The first stage of extraction begins at harvest; the removal of the stems and branches from the Colas and Leaves. This process is generally referred to as ‘bucking’ the plant.

After bucking the remaining branches, colas, and leaves are hung to dry.

Once mostly dried, the remaining branches, leaves, and stems are removed in a process called ‘trimming’. This trim, and not the flower, is what is most often extracted, simply because it still contains a considerable number of valuable cannabinoids but costs considerably less to purchase from the farmer then the higher quality buds and flowers.

Next, the plant’s Colas or buds are dried once more to achieve the proper moisture content for storage in a process called ‘curing’. At this point, the flowers are ready to be extracted or sold to consumers for smoking.

Most, but not all (think: Ice Water Hash and Rosin) cannabis and hemp concentrates need a solvent to first extract them from the plant. The most common solvents that are used in CBD extraction include alkanes such as Butane, Propane and Hexane, Carbon dioxide in its super-critical and sub-critical forms, and Ethanol (alcohol).

Each form of CBD extraction has its pros and cons, as well as their similarities.

All the above examples of solvent based extraction (or Solid Phase Extraction) follow the same basic process of submitting the biomass (CBD-rich hemp in this case) to the solvent which dissolves out the desired compounds from the plant material. After which, you have cannabinoid-saturated solvent that needs to be separated from the cannabinoids (and other desired compounds). This separation happens during evaporation during which the solvent is evaporated and removed from the solution, which then goes on to further refinement steps such as distillation and crystallization.

Along with the more commonly used solvents mentioned above, even coconut oil can be used to extract CBD — taking the place of one of the solvents we talked about above like ethanol or CO2. Coconut oil can be mixed with the plant material (biomass), or with an already-extracted crude from of hemp extract. It is then heated to dissolve the CBD into the coconut oil much like your sugar dissolves into your coffee. Then finally filtered of any residual plant matter.

Coconut oil or olive oil is a great method for small-scale home growers and cooks because it’s easy to do and leaves you with a healthy and edible oil to cook with, easy for dosing! However, vegetable oils oxidize quickly so your resulting CBD oil will need to be used quickly and/or stored in a temperature-controlled environment to ensure shelf-life and freshness.

See also  CBD Oil San Antonio

How much CBD can I extract from one hemp plant?

This question is much more difficult to answer then one would think! This due to the many variables that come into play when attempting to calculate the amount of CBD you can extract from one plant. However, if we make some very lenient assumptions, we can make some very approximate guesses.

First, we’re going to assume your hemp biomass has been bucked, dried, trimmed, and cured properly prior to extraction. If this hasn’t occurred your yields will go down significantly.

Second, we’re going to assume this finished trim or flower contains 10% CBD.

Third, we are going to assume that each of your hemp plants produce 5 lbs. of this finished and cured material per plant.

Lastly, we are going to assume that the extraction facility that is processing your biomass knows what they’re doing! Possibly the biggest variable of all is human error.

  • To produce 1 liter of CBD distillate (or oil) would require approximately 33-5 lbs. of good quality biomass; or about 7 large hemp plants.
  • To produce 1 liter of CBD isolate would require approximately 38-40 lbs. of good quality biomass; or about 8 large hemp plants.

What is the difference between Crude extract and Distillate (oil)?

Lastly, we’d like to briefly define some basic, primary CBD extracts.

A common phrase you’ll often hear when talking about hemp is “CBD oil”. This refers to CBD distillate, a gold-to-amber colored viscous (thick) liquid which tends to be around 85-95% CBD and will crystallize or “sugar” when left at room temperature.

Other forms of CBD include isolate, which is a yellow-to-white powder or crystal that is of very high purity (98-100% pure CBD).

Another form is crude extract, which while less potent than either of the previous forms and ranging widely between 40-70% CBD, has a lot of other compounds (e.g. terpenes) extracted from the hemp which may also have health benefits. This form is usually a black and thick liquid and is almost exclusively used in edibles and topicals.

So, there you have it: the short version of how to extract CBD oil from the hemp plant. Of course, if you have any questions about CBD extraction or CBD extraction equipment please contact us.

How Much CBD is Produced Per Acre of Hemp?

It’s no secret that the CBD industry is booming, but exactly how great is the ROI of hemp farming? How much CBD is produced per acre of hemp, or rather, how much CBD is in hemp oil after extraction?

According to a 2020 survey, the average CBD yield was approximately 1,520 pounds per acre, but what does that actually mean?

In order to get some final numbers regarding how much CBD you can get from an acre of hemp, we need to break hemp farming down into three numbers: how many hemp plants you can grow on one acre of farmland, how much hemp oil product those plants will produce, and how much CBD is actually in the hemp oil.

Key Takeaways

  • The amount of CBD produced from one acre of hemp varies greatly depending on the CBD concentration in the hemp material, the extraction methods used, farming efficiency, and more.
  • In general, you can expect to get one pound of crude CBD oil from each hemp plant, which can then be refined further to create a final product.
  • The amount of CBD products you can create from an acre of hemp depends on the potency of each product and the formula needed.

How Much Hemp Can Be Grown Per Acre?

In general, you can grow roughly 1,500 to 3,000 hemp plants per acre depending on the size of the hemp cultivar you choose and the space between each hemp plant. Adequate sunlight is crucial for CBD production, so it’s recommended that hemp plants are spaced between 3 and 5 feet apart.

Hemp is incredibly versatile and can be used to make paper, textiles, building materials, food products, and, of course, CBD products. The type of product you intend to make determines the type of hemp you’ll need to grow and how much hemp you can grow on an acre of land.

To produce CBD, you’ll need to grow female hemp plants because only female plants produce flowers, and the flower is the richest source of cannabinoids like CBD. You’ll also want to grow a strain of hemp designed for CBD production (as opposed to industrial hemp, which is typically farmed for its fiber or oil content).

Flowering hemp plants generally need more space and sunlight than male plants, so you may find your total capacity for hemp to be on the lighter end, around 1,500 plants per acre.

In a 2018 trial run by the Northwest Crops and Soil Program at the University of Vermont, a single hemp plant spaced 5 by 5 feet apart weighed 9.11 pounds on average. That means that one acre of land can yield approximately 13,665 pounds of hemp biomass that can be used to produce hemp CBD oil.

How Much CBD Oil Can Be Produced From One Hemp Plant?

The answer to this one is pretty complicated because the factors regarding CBD content in hemp can vary greatly. On average, one hemp plant will make approximately one pound of crude oil, or a raw oil product that hasn’t been fully refined.

Crude hemp oil contains CBD and many other plant compounds, like other cannabinoids and terpenes, as well as plant materials that may need to be removed to improve the taste and texture of the final oil.

Of course, our “one pound” estimate is just that—an estimate. The actual amount of crude CBD oil you will get from one single hemp plant depends on various factors, including the:

  • size and quality of each plant
  • soil quality and farming methods used
  • original CBD potency in the hemp cultivar you chose
  • extraction method used (read more about Hemp and CBD Extraction Techniques to learn more)
  • efficiency of extraction (how much product is lost during production)
  • type of hemp product used (biomass vs flower-only extractions)
See also  Can CBD Gummies Make You Nauseous

How Much CBD is in Hemp Oil?

As we mentioned, the initial oil produced from hemp is a crude oil, or an unrefined product that contains an array of plant compounds. Crude oil can be sold wholesale to manufacturers, but it needs to be refined if you intend to create a “final product” like a CBD tincture or gummy.

The amount of CBD in the final oil depends on varying factors, like the CBD concentration in the original plant material, the refinement methods used, and the desired resulting product.

For instance, if you aim to produce full spectrum CBD oil, or a CBD product that contains an array of hemp-derived cannabinoids and terpenes, you’ll be able to produce significantly more from the same amount of crude oil than if you were to make CBD isolate, a pure form of CBD.

Some refinement methods are more efficient than others, but the largest discrepancy is in the potency of the original crude oil. Because CBD potency can range from 3-20% in different hemp cultivars, the CBD potency in the crude oil can also range from 20-75%. Because of these huge discrepancies between hemp crops, it’s impossible to say how much CBD you will get from a single hemp plant or an acre of hemp, but we can make general estimates:

Conclusion: How Much CBD is Produced Per Acre of Hemp Plants?

If you add all of the above factors up, you’ll find that one acre of hemp can produce roughly 1,500 hemp plants, or roughly 1,500 pounds of crude oil. The amount of CBD available depends on the total potency in the original material, but crude oil may contain around 50-65% CBD. On the higher end, this means that you can produce around 975 pounds of CBD oil from one acre of hemp.

Keep in mind that there are numerous factors that affect the CBD yield from an acre of hemp, and it is ultimately impossible to predict how much CBD you can produce from hemp. In perfect conditions, farmers have reported much higher yields than suggested above, while others have suggested that they pulled nearly half that amount from a full acre of hemp.

The answer to “how much CBD is produced per acre of hemp” truly depends on the details, starting with the potency of the hemp cultivar and the soil quality and ending with the particular refinement methods used during production. Over time, hemp producers can gain a better understanding of their CBD yields and improve production rates, allowing them to make better predictions about their CBD yields from crop to crop.

How Much CBD Oil From One Plant? [Update For 2022]

Although it is difficult to give an exact figure, it is possible to estimate how much CBD oil per plant is generated. Growing hemp is a difficult task, and it is only logical to optimize the profits whenever feasible.

The cannabis industry is evolving and developing all the time. Every few years, hemp growers upgrade and replace their equipment, resulting in higher CBD output. This not only boosts company revenues, but it also gives customers better CBD gummies, CBD cream, CBD capsules, CBD oil tinctures, and other CBD products.

We will go deeper into hemp farming and how farmers are cultivating cannabis in an environmentally friendly manner, and we will introduce one of the best brands of CBD oil based on our research.

What Methods Are Used to Extract CBD Oil?

CBD oil is obtained by extracting it from hemp plants (Cannabis Sativa). It is important to remember that CBD oil is not the same as cannabis or hemp seed oil. Cannabis oil is derived from the Cannabis Indica plant, which is a type of marijuana. Hemp seed oil is derived from the seeds of the hemp plant. Cannabidiol is obtained from hemp flowers, leaves, and stems in comparison.

Hemp, not marijuana, is used to make the majority of medical cannabis products. In terms of THC content, these two are vastly different. To put it another way, marijuana has a far higher total THC level than medicinal marijuana, which is why it is still illegal in many nations. Hemp, on the other hand, contains substantially more of the desired cannabinoid CBD. CBD levels in some strains can be as high as 20%.

Full spectrum CBD oil is the most basic form. Hemp processors can distill the material further to produce CBD isolate or broad spectrum CBD oil. Each of these oils has its own set of constituents.

How Much CBD Oil Can One Plant Produce?

One hemp plant yields roughly one pound of CBD tincture. Hemp plants have the advantage of being able to be packed tightly together. So, with a whole acre of plants, you may expect to obtain roughly 1,500 pounds of CBD hemp flowers. All of this will yield about 200 pounds of oil. Despite the fact that the price of medical hemp oil fluctuates, a hemp harvest of this magnitude might earn you more than $20,000.

Needless to say, the more the plant is processed, the less substance it produces. It is possible to get 140 pounds of isolate and 160 pounds of broad spectrum oil from said amount of hemp. Of course, because the prices of these oils are higher, you will not lose money. However, you may need to spend more money and time to set up the distillation process.

Hemp flowers are only produced by female plants. You must be extremely cautious when purchasing hemp seeds so you do not buy male plants. While the oil may be made from any part of the plant, flowers have the highest CBD percentage.

See also  Best CBD Oil For Memory And Focus

The Most Important Elements Which Influence the Overall CBD Quantity

Although these figures appear to be impressive in theory, most businesses overrun (or undershoot) their quotas. Companies that are efficient and have modern technology and agricultural knowledge can create higher yields. The following are some of the elements that influence the overall CBD amount:

Method of extraction

CO2 extraction is the best but most expensive approach. Other methods may be less expensive, but they may leave a harmful residue. In the following paragraphs we will discuss this issue in detail.

The quality of the plant

The quicker you can make the plant, the better. If you want to know how much CBD oil can one plant produce and optimize it, you should consider the traits and genetic potentials of a given strain..

Efficiency as a whole

It is critical for technicians to be knowledgeable about the equipment, extraction methods.

As you could expect, your technicians will become accustomed to the equipment and cultivation, resulting in higher total yields and oil outputs. Using private label and white label services is a popular practice in the cannabis industry.

Considering all the factors above, and users’ comments online, the Cureganics CBD oil is one of the best CBD oils available on the market.

How Is CBD Extracted from Cannabis?

The Cannabis sativa family is divided into marijuana and cannabis. Although both contain CBD, cannabis (how convenient) contains very little (less than 0.2%) THC compared to marijuana and can be grown legally by farmers in many parts of the world. This is why CBD is extracted from raw materials and ground cannabis.

Depending on the purification steps after the first extraction, different types of extracts are produced from full to broad spectrum CBD to CBD isolate. However, each process starts and is determined by choosing a method for this initial extraction, so let’s look at the most common options.

CBD Extraction with Alcohol

The alcohol used for extraction is usually ethanol or isopropyl alcohol, both of which are solvents often used in food production. The herbal substance is saturated with it, then the solution is filtered with the extract components from the mixture and the alcohol is distilled out.

The so-called crude extract is then further distilled to remove, for example, chlorophyll (the green color of plants) or unwanted cannabinoids such as THC while enriching cannabinoids such as CBD.

Alcohol extraction is the most widely used method for CBD extraction worldwide. The solvent can be recycled and used for later extraction, saving money and resources. It also does not require overly specialized equipment.

CBD Extraction with CO2

If you have read anything about CBD extraction, you have probably come across CO2, the cleanest solvent possible. CO2 is usually a gas, but when pressure and temperature are properly regulated, it can be the so-called ‘supercritical fluid’ used as the extraction medium.

The extraction process is essentially similar to alcohol, except that a more complex setting is required to handle the high pressures caused by the use of liquid CO2. On the positive side, more set points allow more unwanted components to be removed from the beginning and the solvent (CO2) to evaporate easily at the end of the process without leaving any trace in the product.

CO2 mining has become commonplace in recent years, but the high operating costs and specialized equipment required may be a problem.

CBD Extraction with Vegetable Oil

Extracting cannabinoids with vegetable oils is probably the oldest method in history and is therefore worth mentioning here. The oil is “injected” with the hemp raw material, which slowly releases its oil-soluble components, just like brewing a cup of tea.

The main drawback is that the oil is not easily removed, which means that the concentration of cannabinoids in the product remains relatively low and it is not possible to selectively remove unwanted components such as THC. Vegetable oils are also relatively expensive and ineffective compared to CO2 or alcohol.

CBD Extraction with Butane

Like ethanol and CO2, butane can be used as an effective solvent for cannabinoids when passing through dry plant materials. The initial gravity of the oscillations is high, which causes all the effects of this solvent to be eliminated by using a small amount of heat or a small vacuum. However, it is highly explosive and flammable, making it difficult to work with. In addition, it is not a preferred solvent for use in food products.

The resulting extract still has a high content of trepens and normal THC levels and is usually not further refined.

CBD Extraction with Pressure

This method results in a product that is very similar to butane extraction but completely without the use of solvents. Instead, high pressure and heat are used to obtain the resin extract directly from plant materials. The more pressure it uses, the less heat must be used, leaving valuable terpenes intact. This method has become increasingly popular with smaller manufacturers looking for full-spectrum extracts, while still retaining the natural content of THC, terpenes and other plant compounds.

Based on our research Cureganics is one of the few CBD companies that uses a strict extraction procedure to ensure that only the highest-quality CBD products are made.

All Cureganics products are tested for purity using high-performance liquid chromatography to ensure the highest quality and efficacy. Cureganics products also have a Colorado Department of Public Health and Environment-approved Free Sale Certificate.

As you can see, there are different ways to extract CBD from hemp. The choice of method depends on various factors such as the intended use of the extracted product and economic and environmental considerations as well as the available equipment.

How useful was this post?

Click on a star to rate it!

Average rating 5 / 5. Vote count: 1

No votes so far! Be the first to rate this post.