How to germinate cannabis seeds | peat pellet method In our previous post we showed you how to germinate cannabis seeds using wet paper towel method. That method is good, but not perfect. To The difinitive guide to germinating cannabis marijuana seeds from AmsterdamSeedSupply. Much controversy surrounds the raising of cannabis seed. Many first time growers are bombarded with advice, often conflicting, on how exactly this should be done. Marijuana | MMJ | Weed
How to germinate cannabis seeds | peat pellet method
In our previous post we showed you how to germinate cannabis seeds using wet paper towel method. That method is good, but not perfect. To transplant those sprouted seeds you would have to touch them directly, which is not good. Freshly germinated seeds are like babies, you wouldn’t want to touch fetus with your hands that have oils and dirt on them. Same goes for sprouted seeds. It has to be sterile, so you would want to make as less direct contact with it as possible.
Freshly sprouted cannabis plant
Lets talk how to germinate cannabis seeds using peat pellets. We highly recommend using this method over wet paper towel method as this one is safer can gives you a better success rate.
For this to work you will need peat pellets, you can find them in any gardening store or order them online. These pellets contain lots of nutrients for your freshly sprouted seeds. They come in small, dry, compressed pellets. Peat pellets are not very expensive and definitely worth the price. They look like this:
Jiffy peat pellets
How to germinate cannabis seeds using peat pellets – process
Once you have the pellets it’s time to prepare them. Soak them with water, we suggest that you’d use distilled water as tap water contains a lot of stuff that is not very good for these fragile younglings. Leave them for about 10 minutes and they will expand.
After 10 minutes (+/-) they should look something like this —>
You can plant your seeds in them. Use a pen to make small holes in them, about 1/2 inch deep. Put your seed using pair of tweezers in that hole and cover it up. One pellet should hold one seed for best possible results.
When you plant seeds into wet pellets, they begin their life. You should see them sprouting in 2-7 days period. Throughout this time, keep the pellets moist and warm ( 20-25°C). If they dry out, that might be the end of it. If you get good quality seeds, there’s nearly 100% success rate that they will germinate.
How to germinate cannabis seeds using peat pellets – next step
So your seeds have sprouted after 2-7 days. What’s next ? When you seed that your seeds popped out, you need to put them under direct light, cause once they pop, they crave for that light. Will it be grow light or sunlight, that’s entirely up to you and your chosen growing method. You need to do one more thing – transplant them into pots. Don’t pull them out of the pellet, there’s a very good chance you will destroy the plant. Just bury plant with the whole pellet. Roots will eventually go straight through pellet.
Transplanted cannabis plants
Congratulations! You’ve germinated some seeds. Now let ’em babies grow.
Where to get good quality seeds?
We have been using the service of “I love growing marijuana“. They ship very good quality seeds , and if you buy 10 or more seeds they throw in 10 more free off charge. They ship seeds worldwide, but if you live in a country that don’t have marijuana legalized, be cautious, make sure no one finds out about it. Be smart, be safe.
Germinating Cannabis Marijuana Seeds
Much controversy surrounds the raising of cannabis seed. Many first time growers are bombarded with advice, often conflicting, on how exactly this should be done; however, it need not be such a complicated task. Cannabis seed is simple to grow, and if fresh, 90-100% germination rates are not unusual.
The ‘Kiwiland Method’ for raising seed, has been developed from professional horticultural practices used the world over. We use it because it works, and it’s simple.
Table of contents
The list below is standard equipment recommended by Kiwiseeds and assumes you already have the necessary grow space and lighting set up. If you haven’t already got your equipment you can buy that online at https://www.kiwiland.com/
1. Propagator with bottom heat or
2. Heat pad + seed-tray
3. Thermostat controller
4. Soil thermometer
6. Large jiffy pots + seed-raising mix or
7. Rockwool starter blocks
8. Fine sprayer
9. Identification labels
Wet thoroughly enough perlite to cover the bottom
of the propagator approximately 2cm deep. Plug the propagator, or heat pad, into the thermostat controller, plug the controller into the power and set for 23 C. Place the heat-sensing probe into the wet perlite just beneath where the seedlings roots will be. If using a heating pad lay it out beneath the propagator tray.
Jiffy pots preparation
Pre-soak the jiffy pots in warm water then fill them to the top with seed-raising mix making sure to take out any bigger pieces that may obstruct the young shoot as it emerges.
(This can also be done with the help of a coarse sieve if you like.)
Completely saturate the jiffy-pots and their contents, but allow them to drain well. Do this carefully so as not to wash the fine soil away. Top them up and repeat if the mix has sunken too much. It’s important to have them as full as possible to give the young roots plenty of room to grow for the week or two until they are potted on, and, because having a greater volume of the mix in the pots means they take longer to dry out under the warm lamp.
With a thin pointed object such as a pencil, make a small hole in the center of each jiffy-pot about twice the depth that the seed is long (This varies with strain, but 5-8mm deep should be sufficient. Often the mistake is made of planting seeds too deeply, and they rot before they see the light of day. To ensure this doesn’t happen, never sow seeds deeper than 1cm). If sowing more than one variety remember to prepare identification labels in advance and label them as you go to prevent mix-ups.
Put the cannabis seeds in Jiffy pots
Sow seeds directly into the holes, and cover with a little of the moist seed-raising mix from around it with the help of the pencil. Use a little more fine mix if needed. Some growers have the patience to sow seeds a certain way up, and this can be beneficial, especially with big seeds. If this is done place the seed, point up, ensuring the root can travel downwards with ease.
Watering the seeds
Using the mister bottle, spray the freshly covered seeds until the mix is damp. Don’t pour water onto the pots as this can wash away the mix and expose seeds.
Transfer jiffy-pots into pre-warmed propagator tray, and settle them in making sure the wet perlite surrounds the pots, getting right up between them. This ensures the pots stay moist until well after the seeds germinate, protecting the young roots from drying out.
Lighting, temperature & humidity
Set the tray under either fluorescent lighting or a low-wattage H.P.S. to keep the newly planted seeds warm. At this stage no light is necessary but warmth is important, and low light provides this without drying the pots out. An air temp of 20-22C is ideal, a degree or two lower than the soil temp (around 23C). Humidity if regulated can be set for around 60%.
Growing the cannabis seedlings
As soon as the seedlings have germinated they need light. The food store supplied by the seed itself has all but been used up, and the plant needs light to photosynthesize and grow.
When growing marijuana in the vegetative stage you may choose how long you wish to keep the lights on, as long as it’s 18 hours or more. The advantages are that plants will grow faster with 24 hours light, and a constant temperature is easier to maintain this way, something hugely beneficial to young seedlings. Disadvantages are that you’ll need to water more, of course, your lamps and ballasts don’t get a break, and the electricity bill increases.
Some people advise keeping young seedlings under fluorescent lighting for a while but this doesn’t provide them with the correct spectrum for photosynthesis. It is best in our opinion to place seedlings directly under low wattage H.P.S lamps, 150/250/ or 400 watts, at a good distance away.
Once the plants are a few days growing they need to be moved closer to the lamps in order to prevent stretching. Move them as close to the lamp as the tops of many plants would be comfortable. (30-60cm depending on the lamp size.)
Make sure a breeze (oscillating fan) is blowing over the young plants, primarily so they don’t overheat, but furthermore to help strengthen delicate stems by stimulating cellulose production. Spindly stems cannot support heavy flowering growth. The importance of your internal air circulation cannot be stressed enough. It will exercise your plants and make them grow stronger while reducing many hazards that could ruin your crop.
Now that the plants have strong light they require more water and nutrients as well. A light organic feed or nutrient solution starting with an E.C of no more than .8 (with the water already at .5) can be sprayed directly on the plant and watered into the soil. The seed-raising mix contains no nutrients so within a few days the plants will be hungry.
Young seedlings love humidity, and a constant 60-70% is ideal at this stage. Use a cheap mister bottle, and spray regularly freshwater (ph- 6.5-7.5) over the leaves. This increases humidity, and washes dirt and dust off the leaf surface, unclogging stomata and enabling the plant to breathe properly. In natural conditions, the rain would do this for us.
Problems raising seedlings
Problems can occur during germination. Here is a list of some of the more common reasons why your seeds may not be doing so well.
Seeds need to be damp, not wet for germination. Excess water prevents oxygen from getting to the seed. Poorly drained soils may also cause soil fungus diseases. The condition of wet soils may be improved by adding perlite, which will aerate your soil. Make sure any trays or pots you use have holes in the bottom to let the excess water drain.
A certain amount of water is essential for germination, so maintaining constant soil moisture during the germination period is vital. Spray the soil surface with a fine mist, or cover containers with glass or a damp cloth to prevent your soil drying out. Make sure you remove the cloth once the shoot emerges.
High temperatures result in excessive soil desiccation and injury to seeds and seedlings. We recommend a constant temp of 20-25 degrees.
Cold temperatures can kill seedlings and prevent germination. Cool temperatures can result in slow, uneven germination, and attack by soil diseases. If growing outside, you may want to start your seeds indoors, before outdoor planting. Make sure planting is not done too early when there is still a chance of frost.
If you sow your seeds too shallowly the seeds can dry out. A depth of between .5 to 1cm is about right.
Soil too firm
Making your soil mix too firm can prevent oxygen from getting to your seeds and drainage can be affected. Pat freshly covered seeds lightly with your fingers.
Soil too loose
Soil that’s too loose results in too much air surrounding the seed. Seeds planted in this manner will not absorb moisture properly, and it’s likely they’ll dry out. Cover freshly sown seeds with fine mix and pat down lightly with your fingers.
Seeds may rot, or the young seedlings may fall over. Overwatering, poor drainage and lack of aeration will increase the likelihood of this occurring. Plant seeds in sterilized potting mix, and make sure your containers are clean.
If your seeds have not been stored correctly they can deteriorate. Look for darker seeds that are a little bigger, without cracks or chips. Any seeds that look shriveled or wrinkled should be discarded, as this means the seed has dehydrated and is dead.
How To Germinate Marijuana Seeds With Jiffy Pellets
My favorite way to germinate marijuana seeds is with jiffy pellets. I currently have a 100% germination rate using jiffy pellets!
Using jiffy pellets is a very safe and easy way to germinate your marijuana seeds. There are only a few steps, which I will go over here in detail.
You can find jiffy pellets and almost every garden store, or you can order them here. (Of course I always order them online because I am a lazy stoner.)
They come dry and compressed. We will need to add water to them so they expand and become usable for planting.
You should NOT soak the jiffy pellets. They will become too wet and if you squeeze them out they can become unstable.
Instead, we need to slowly pour 1 cup of water over them. Then wait several minutes until they expand.
Once the jiffy pellets have expanded, we can plant our marijuana seeds.
It is very important to only put one marijuana seed per jiffy pellet.
Take one of your seeds and put it about .5″ deep in the pellet. It does not matter which way the seed is turned. Cover it with some of the top soil.
If you have a jiffy pellet kit with a dome, place that over the top. Marijuana seeds need a relatively humid environment to germinate, and the dome will help with that. Just make sure to take it off a few times per day so the seeds can get fresh air.
It will take the seeds a few days to germinate. It is very important to make sure that they jiffy pellets do not dry out during this time.
The ideal temperature marijuana seed germination is 70°-78°, so try to keep the jiffy pellets in an environment that can accommodate that.
Anywhere from 2-8 days later, you will see your marijuana seeds begin to pop their heads out of the jiffy pellets. This will not happen to all your seeds at one time, so be patient and do not mess with the ones that need a little extra time.
Once the seeds have broken through the soil, they will need to be placed on either a 24/0 or 16/8 light schedule to start the germination phase.
Good luck with germinating your marijuana seeds with jiffy pellets! If you have any questions, please feel free to ask in the comments below.